Knitted Mesh

Knitted Mesh as its name implies is a metal wire or plastic strand knitted into an interlocking looped mesh structure the same way as stockings and should not be confused with woven mesh which is the form of rectangular openings of parallel wires. The knitted mesh has a flexibility not possessed by the woven mesh due to the loops being able to move relative to each other thereby giving a two-way stretch. This flexibility gives knitted mesh a unique advantage for many industrial uses.

Application of Knitted Mesh

Knitted Mesh is widely used in the petroleumchemistry metallurgy machine pharmaceuticals automobile industry and environmental protection for distillating absorbing evaporating and filtering so as to eliminate the entrainment and foam mixed in the gas and liquid.

Features of Knitted Mesh
- High strength and stability.
- High filtration efficiency.
- Good shielding performance.
- Corrosion and rust resistance.
- Durable and long service life
Technical Details
- Knitted mesh has both a large surface area of wire.
- knitted mesh is its inherent resiliency.
- The knitted mesh has a flexibility.

Specification of Knitted Mesh

Specification of Knitted mesh
Material	stainless steel wire 304 304L 316 316 L galvanized wire brass wire copper wire titanium wire alloy wire nickel wire nylon wire PE wire fiberglass wire etc
Wire Diameter	Round wire	0.08-0.55mm
Wire Diameter	Flat wire	0.10.4mm0.10.3mm0.2*0.4mm
Hole Size	4mm×3mm 5mm×6mm 2mmx4mm 4mmx5mm etc.
Width	40mm 80mm 100mm 150mm 200mm 300mm 400mm 500 mm 600mm etc.
Length	30-200m
Wire Number	Single wire double wires several wires.
Mesh type	Standard type	40-100 60-150 105-300 140-400
	Highly efficiency type	60-100 80-100 80-150 90-150 150-300 200-400
	Damping type	30-50 48-50 30-60 30-80 50-120
Packing	With carton or wooden box

Knitted Mesh Type	Typical wire diameter(mm)	Range of natural width(mm)	Typical number of stitches per cm on length	Typical number of stitches per cm across lay flat
Standard Mesh	0.2-0.35	30-1000	1.6	1.9
Coarse Mesh	0.2-0.35	30-550	1.6	0.74
Super-Coarse Mesh	0.4-0.6	330-550	0.5	0.5

Factory Production System

Document
1. Commercial Invoice including HS Code
2. Packing List including number of boxes,net weight,gross weight,Marks & Numbers
3. Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
4. Material Test Certificates as per EN 10204 3.1, EN 10204 3.2
5. Test Certificates certifying NACE MR0103, NACE MR0175
Testings
1. Positive Material Identification – PMI Testing
2. Chemical Analysis – Spectro Analysis
3. Mechanical Testing Such as Tensile, Elongation, Reduction of Area
4. Hydrogen-Induced Cracking (HIC) Test, NACE TM0284
5. Sulfide Stress Corrosion Cracking (SSC), NACE TM 0177
Packaging

The different ways in which our products are packed are:
1. Shrink-wrapped
2. Wooden Boxes
3. Wooden Pallets
4. Wooden Crates
5. Carton boxes
Marking

We mark Duplex 2205 as needed with the most suitable & visible marking techniques. Standard Marking System :-
1. Manufacturer’s Name or Trademark
2. Material Designation
3. Size Designation
4. Rating Designation
5. Melt Designation
6. Marking for Identification

Knitted Mesh

Knitted Mesh

Knitted Mesh

Knitted Mesh

Application of Knitted Mesh

Related Products

Factory Production System

Document

Testings

Packaging

Marking

Looking for some more information ?